|
TEST
THE WATER
Use the test
strips according to the bottle directions, then
follow the steps below.
Always
add chemicals with the jets on and the cover off.
BALANCE PH & ALKALINITY
Add Spa
Sentry to hold the ph and alkalinity in the optimum
range. This should be added after the spa has heated
to the set temperature. Initially the water will become
cloudy, but will clear up in 12 to 24 hours. If ph and
alkalinity are low initially, add two tbsp. of baking
soda to raise the levels prior to adding Spa Sentry.
SANITIZE
For chlorine
and bromine
concentrates, add the correct amount (usually 1/2 tsp.
per 100 gallons) according to the instructions on the
bottle. For Nature
2 or Spa
Frog users, insert cartridge into the filter and
remember to change your cartridge every four months.
The "ok" range will be .5 on the test strip
chart. For Vision
users, remember to rinse the bag thoroughly before inserting
into the filter.
OXIDIZE
Add 2 tbsp. (1 oz.) Spa
Shock per 300 gallons weekly. Fast-acting, this
product allows you to return to the spa 15 minutes after
application. If you are using Enhanced
Shock, be sure that the chlorine level has dropped
back into the OK range before entering the spa.
Remember to change your filter
each year!
Use your mouse To click on links
in paragraphs to order products
|
